Numer produktu : 2436314
StarTech.com USB 3.0 to 2.5/3.5" SATA II
Kontroler pamięci z power indicator, 2.5", 3.5", SATA 6Gb/s, 6 Gbit/s, USB 3.0
275,00 zł
223,58 zł netto
Koszt wysyłki od 20,00 zł
W magazynie zewnętrznym, czas dostawy 6-7 dni
Ładowarka w zestawie
Dock your 2.5in or 3.5in SATA III SSDs/HDDs over USB 3.0 with UASP. The SDOCKU33BV UASP-enabled USB 3.0 docking station makes it easy for you to connect and swap 2.5in or 3.5in SATA III hard drives (HDD) and solid state drives (SSD) through an available USB port. The dock performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives.With support for large capacity SATA I/II/III drives (tested up to 4TB), and 2.5in or 3.5in drives this HDD/SSD docking station is compatible with virtually any SATA drive, and greatly increases the storage/backup capabilities of your computer.Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock.To ensure compatibility with your computer system, the SDOCKU33BV supports all of the leading operating systems, including: Microsoft Windows (8/7/Vista/XP/Server 2008/Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS.UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.At the same peak in testing UASP also shows an 80% reduction in required processor resources.Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
Producent
Numer produktu
2436314
Model
SDOCKU33BV
Ean
0065030855303
Do strony producenta
Opis produktu
Startech USB 3.0 SATA III Docking Station SSD / HDD with UASP - External Hot-Swap Dock w/ support for 2.5"/3.5" drives (SDOCKU33BV) - kontroler pamięci - SATA 6Gb/s - USB 3.0
Rodzaj urządzenia
Kontroler pamięci - zewnętrzna
Typ magistrali
USB 3.0
Zgodne obudowy dysku twardego
2.5", 3.5"
Charakterystyka
Kontrolka mocy
Interfejs
SATA 6Gb/s
Szybkość transmisji danych
6 Gbit/s
Obsługiwane urządzenia
Twardy dysk
Zasilanie
AC 100/230 V
Wymagania systemowe
Apple MacOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Linux 2.6.31 lub nowszy, Windows 8 (32/64 bits)
Zaprojektowany dla
P/N: SVA12M2NEUA, SVA12M5NA, USBDUP15, USBDUPE115, USBDUPE17
Ogólne
Rodzaj urządzenia
Kontroler pamięci - zewnętrzna
Zgodne obudowy dysku twardego
2.5", 3.5"
Host Bus
USB 3.0
Charakterystyka
Kontrolka mocy
Kontroler pamięci masowej
Interfejs
SATA 6Gb/s
Szybkość transmisji danych
6 Gbit/s
Obsługiwane urządzenia
Twardy dysk
Rozszerzenie / połączenie
Interfejsy
1 x SATA 6Gb/s - SATA combo
Połączenia
1 x USB 3.0 - 9 pin USB Type B
Różne
Dołączone przewody
1 x kabel USB - zewnętrzna
Zgodność z normami
WHQL, FCC, RoHS
Zasilanie
Typ
Zasilacz
Wymagane napięcie
AC 100/230 V
Oprogramowanie / Wymagania systemowe
Wymagany system operacyjny
Apple MacOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Linux 2.6.31 lub nowszy, Windows 8 (32/64 bits)
Parametry środowiska
Minimalna temperatura pracy
5 °C
Maksymalna temperatura pracy
35 °C
Dopuszczalna wilgotność
20 - 80%
Informacja o kompatybilnosci
Zaprojektowany dla
P/N: SVA12M2NEUA, SVA12M5NA, USBDUP15, USBDUPE115, USBDUPE17
Powyższe informacje / specyfikacje są wskazówkami i mogą zostać zmienione przez producenta bez powiadomienia. Z zastrzeżeniem błędów w druku i obrazów orientacyjnych. Niektóre teksty są generowane automatycznie lub tłumaczone maszynowo i mogą posiadać błędy lub mogą być mylące.