ANYCUBIC Water-Wash Resin 2.0 - Gray
ANYCUBIC Water-Wash Resin 2.0 is a photopolymer resin for LCD and DLP 3D printers with 405 nm UV curing. Its hydrophilic formula allows uncured resin residue to be washed away with water instead of IPA alcohol, simplifying post-processing. With a viscosity of 190–230 mPa·s, volumetric shrinkage of 2.2–5.5% and printing precision of 0.15 mm, it produces detailed models with smooth surfaces. The resin also offers 16–22% elongation at break, increased crack resistance, reduced odor and improved resistance to yellowing.
Czytaj więcej o Anycubic tutaj
The resin combines a viscosity of 190–230 mPa·s with low volumetric shrinkage of 2.2–5.5%, supporting smooth material flow and detailed prints. A stated printing precision of 0.15 mm enables accurate reproduction of fine model features, while 16–22% elongation at break provides increased resistance to cracking and deformation after curing. Improved build plate adhesion also helps reduce the risk of failed prints.
Water-Wash Resin 2.0 has reduced odor and an improved formulation that helps limit yellowing, allowing finished models to retain their appearance over time. The resin maintains low viscosity at temperatures between 15°C and 20°C and is compatible with LCD and DLP printers using 405 nm UV curing.
Powyższe informacje / specyfikacje są wskazówkami i mogą zostać zmienione przez producenta bez powiadomienia. Z zastrzeżeniem błędów w druku i obrazów orientacyjnych. Niektóre teksty są generowane automatycznie lub tłumaczone maszynowo i mogą posiadać błędy lub mogą być mylące.