Spectrum Filament / PET-G Matt / Bloody Red (RAL 3020) / ⌀ 1.75 mm / 1 kg
PETG matowy - czerwony - Filament do drukarek 3D
PETG (Politereftalan etylenowy z glikolem) to materiał filamentowy, który łączy wytrzymałość i trwałość ABS z łatwością drukowania PLA. Znany jest z wysokiej odporności na uderzenia, dobrej elastyczności oraz odporności na chemikalia i wilgoć, co czyni go idealnym do funkcjonalnych części i zastosowań na zewnątrz. PETG ma wyższą temperaturę topnienia niż PLA i często wymaga podgrzewanego stołu drukarskiego, aby uniknąć deformacji. Dodatkowo materiał jest stosunkowo łatwy w druku i zapewnia gładkie i wytrzymałe powierzchnie.
- Waga: 1 kg.
- Długość: 307,96 m.
- Średnica: 1,75 ± 0,05 mm.
Temperatura topnienia: 230 - 255 °C.
Temperatura stołu drukującego: 60 - 80 °C.
Prędkość drukowania: 30-70 mm.
Gęstość (przy 21,5 °C): 1,35 g/cm³.
Wytrzymałość na uderzenia: 3,5 KJ/m².
Wytrzymałość na rozciąganie: 30 %.
Odporność na temperaturę: 80 °C. przed odkształceniem
Granica plastyczności przy 50 mm/min: 45 MPa (drukowanie 3D)
- Szpula: 200mm Średnica zewnętrzna & 52mm Średnica wewnętrzna & 67mm Wysokość, W plastiku
Spectrum PET-G MATT Filament
Matte print surface
Spectrum PET-G MATT is a PETG-based material whose chemical composition has been modified to achieve matte surface finishes on printed parts. The matte appearance of the manufactured components significantly enhances their aesthetics and additionally minimises the visibility of layer lines on the side surfaces of printed elements.
The use of dedicated additives has resulted in improved temperature resistance, impact strength and reduced brittleness of the finished parts. The modification of Spectrum PET-G MATT also includes UV stabilisation.
Key properties:
- VICAT – 85 °C
- UV stabiliser
- High-quality matte side surface with barely visible layers
- Improved adhesion between layers and between the build platform and printed parts
- High mechanical strength of printed elements
- No shrinkage after cooling
Areas of application:
- Interior design and decoration
- Architectural models
- Educational projects
- Initial industrial design prototypes for concept visualisation
The above-mentioned properties make Spectrum PET-G MATT particularly suitable for applications focused on the presentation of strong aesthetic qualities, such as initial industrial design prints for concept visualisation and the presentation of design variants of specific constructions. Additionally, it is well suited for interior furnishing applications and the production of architectural models.
VERIFY YOUR SPOOL – the most precise quality control system on the market
Filament for 3D printers is produced using free extrusion. This is one of the most demanding extrusion processing techniques due to the particularly strong influence of process parameters on product dimensions and material homogeneity.
During the production of Spectrum Filaments, every 1 mm of material is continuously measured on two axes with an accuracy of ±0.8 µm, resulting in a high-quality final product. As proof of this, Spectrum Filaments is one of the few manufacturers worldwide to introduce the possibility of presenting individual parameters for each produced spool online:
- Diameter chart along the entire length of the filament,
- Average diameter of the entire spool,
- Ovality,
- Standard deviation.
Precise verification guarantees that Spectrum Filaments products meet the rigorous requirements of the market.
Powyższe informacje / specyfikacje są wskazówkami i mogą zostać zmienione przez producenta bez powiadomienia. Z zastrzeżeniem błędów w druku i obrazów orientacyjnych. Niektóre teksty są generowane automatycznie lub tłumaczone maszynowo i mogą posiadać błędy lub mogą być mylące.