Elektryczność i hydraulika - strona 353

EGLO BELLIZZI spot rail in steel with gray and white textile shades, 2L. Height 18.5 cm, length 31 cm, width 9 cm. E14, max. 2 x 7.5 watts. Delivered excl. light sources. IP20.

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Geberit Mepla T-kawałek, zmniejszony: d=50mm, d1=32mm, d2=50mm

Performa - uchwyt poziomy szybkiego montażu - przedocynkowany - 82 mm x 344 mm x 42 mm

63A5P 6H400V panel mounted receptacle TA IP 44 with frame terminal and Soft-Contact

LED spot light source, GU10, 4.5 W (replaces 50 W), class F, warm white, 2700 K

Żarówka punktowa LED, kształt: PAR16, GU10, 4.7 W (ekwiwalent 50 W), klasa F, światło białe ciepłe, 2700 K

Końcówka do instalacji kanału LF 60230 + FB 60230 perłowa biel

Regulator różnicowy ciśnienia Danfoss AVP. Samoczynny regulator różnicowy ciśnienia przeznaczony głównie do stosowania w systemach ogrzewania miejskiego. Regulator zamyka się przy wzrastającym ciśnieniu różnicowym. Regulator posiada zawór regulacyjny, aktuator z jednym sterownikiem

Dla rur PP-, PE lub PVC, z łącznikiem do rur MA lub części rury MA z łącznikiem JET®.

Końcówka bezhalogenowa do kanału instalacyjnego LF/LFH 60110/111 w kolorze perłowej bieli

Umywalka Oras Safira z odpływem automatycznym

CUBIC, 3102-0816

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Terminal rurkowy Cobber KRF95-16Materiał: miedź 99,95%, cynkowany.Dla przewodów Cu o przekroju 95mm2 skręconych (klasa 2) i elastycznych (klasy 5+6) zgodnie z normą IEC60228. Dłoń M16.Z otworem kontrolnym.Rekomendowane narzędzie: V600, V1300, V250.Numer matrycy: 20.

Chromowane

EGLO TB PODSTAWOWY ZŁĄCZNIK do systemu szynowego. Biały plastik. IP20.

Osram SMART+ ZB B40 D lampa LED Biały 2700 K 4,9 W E14

Lampa ścienna/sufitowa, LED, 8 W, białe zimne światło, 4000 K, biały

TPS411 GEN 5 firmy MCO Home to przełącznik ścienny z wbudowanym przekaźnikiem i kontrolą sceny. Przekaźnik można sterować zarówno za pomocą przełącznika dotykowego,...

5-in-1 WiFi controller for RGB-CCT LED strips 6A per channel, maximum 15A total output WiFi 2.4GHz and RF control for DC12-24V Versatile WiFi controller for advanced LED strip control Miboxer WL5 controller offers ultimate control over your LED strips with WiFi-IEEE 802.11b/g/n 2.4GHz communication. Control via smartphone app makes it easy to customize the lighting. With 6A per channel and maximum 15A total output, you can control multiple strips simultaneously. 2.4GHz RF frequency with 6dBm transmission power ensures stable connection.

Sunrise remote control for Dual White (CCT) control 2.4GHz RF with 30 meter control range Extremely low standby consumption of only 20µA Elegant white remote control for color temperature control Miboxer S1-W Sunrise remote control offers simple and effective control of dual white (CCT) lighting. With 2.4GHz RF and GFSK modulation technology, precise control of color temperature and brightness is ensured. Powered by 2 pcs. AAA batteries (not included) with minimal power consumption. 6dBm transmission power provides reliable 30 meter range.

2-in-1 high-current controller for 48V track systems with Zigbee 3.0 and 2.4GHz RF 30A maximum output current with automatic forwarding and synchronization Mesh network with strong noise reduction and 100 meters control distance via Zigbee Powerful controller for professional track installations Miboxer HZ2 is a 2-in-1 high-current controller that combines Zigbee 3.0 and 2.4GHz RF technology for flexible control of track lighting systems. With an input voltage of DC12-48V and an impressive output current of 30A, it is perfect for both private and commercial installations. The controller follows the Zigbee 3.0 standard protocol, which provides low power consumption and robust mesh network with strong interference suppression. It supports both TUYA SMART app control and third-party voice assistants such as Alexa and Google Assistant.