Akcesoria foto i wideo - strona 20

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

The Genie is a simple, portable solution for motion control Time-lapse Real-time video. Designed to be part of your regular camera kit, with no external wires, batteries or controllers there’s no need to ever go without the option of motion control again.

The Syrp link cable connects the Genie with your camera allowing the Genie to control your camera’s shutter. This is a required accessory to shot photos for Time-lapse and photo stitching. It is not required for video recording with the Genie.

Every camera model uses a specific Shutter Link Cable and we offer cables to support hundreds of different cameras.

Tilta MB-T16-DCF akcesorium do filtra aparatu Uchwyt filtra pierścienia adaptera

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

Tilta MB-T16-72 akcesorium do filtra aparatu Uchwyt filtra pierścienia adaptera

1. (1) 19mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS
Color: black
Material: aluminum-alloy

- Retains access to the camera shoe mount, ports, battery, and display
- Multiple 1/4"-20 accessory threads
- 1/4"-20 camera mounting screw
- Removable Manfrotto-style plate fits Manfrotto-compatible baseplates
- 1/4"-20 mounting threads on the bottom for tripod mounting
- One integrated shoe mount
- Integrated single rod port for optional Tilta single-rod mount
- Aluminum and steel construction

Tilta HDA-T02-MB akcesoria do montażu kamer Uchwyt do monitora

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable.

Compatible with Type II Baseplates and Type I Side Handles.

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

Tilta RS-TA-RD1 akcesorium do stabilizatorów wideo Kabel streujący Czarny Miedź, Stal nierdzewna 1 szt. RED Camera

Tilta MB-T15-TF akcesoria do montażu kamer Klamry montażowe

- Mount Accessories via Cold Shoe Receiver, NATO Rail, 3/8"-16 and 1/4"-20 Threads with Locating Points
- Custom Designed for the Nikon Z8 Camera Body
- Arca Ready via Compatible Bottom Plate Perfect for DJI Ronin and Compatible Tripods
- Security Threads Provide Multiple Points of Contact for Improved Security
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

Tilta MB-T16-SCF akcesorium do filtra aparatu

- Custom designed for the Fujifilm GFX100 II Camera Body
- Mount Accessories via Cold Shoe Receivers and ¼”-20 Threads with Locating Points
- Flexible Compatibility Supports Fujifilm Battery Handle Grip and Electronic Viewfinder
- Cable Clamp Secures HDMI and USB-C Cables via Thumb Screws for Stable Data Transmission
- 1/4"-20 Top Handle Provides Improved Flexibility When Operating and Handling

Tilta TGA-RG-V akcesorium do stabilizatorów wideo Tabliczka na baterie Czarny Aluminium, Stal nierdzewna 1 szt. DJI Ronin RS 2

Tilta TA-QRTH5 akcesoria do montażu kamer Uchwyt aparatu

Tilta Right Side Wooden Handle 2.0 Uchwyt

Tilta TT-C07 akcesoria do montażu kamer Płyta jaskółczy ogon

Tilta MB-T15-58 akcesorium do filtra aparatu Uchwyt filtra pierścienia adaptera

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

Tilta TA-AMB-B akcesoria do montażu kamer