Ładowanie samochodów elektrycznych - strona 8

Allows the go-e Charger Gemini flex 11 kW and Gemini flex 2.0 11 kW to be connected to a standard household socket.

The S-Line charging cable is suitable for all Type 2 electric cars on the market and is part of our exclusive S-Line charging cable series. The cable is 3 meters long with a maximum output of 22kw at 32A current. In addition, it is made of TPU material, which provides good resistance to oil, abrasion and UV light. The cable is also flexible in the cold with an IP rating of IP54.

Sinox EV charging cable mode 3. 32A 1 phase. 5m. Black

Sinox EV charging cable fits all EV cars on the European market that use Type 2 connectors.

• Type 2 connector
• 32A
• 7.6kW
• 1 phase
• TPU cable
• TÜV approved

Sinox EV charging cable mode 2. 6A 1 phase. 5 m. Black

Sinox EV charging cable fits all EV cars on the European market that use Type 2 connectors.

• "Grandma charging"
• Schuko 230V plug for type 2 plug
• Locked to 6A according to the Danish Safety Technology Authority's recommendations
• When using Schuko(regular plug), charging should be for a maximum of 2 hours for safety reasons
• 1.35kW
• 1 phase
• TÜV approved

Zaptec Sense is a smart load balancer for charging electric vehicles that connects via RJ-45 and requires an external power supply. It optimizes available power and protects the building's fuses, enabling faster and safer charging without overloading. Zaptec Sense supports Wi-Fi and is designed for indoor use. The device has an IP20 rating, operates at -20°C to +40°C, and measures 58.6 x 58.4 x 25.1 mm. Not compatible with solar cells. When used with Kamstrup, an external power supply is required.

Ratio Smart delivers an seamless charging experience for your EV.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

Ratio Smart delivers an seamless charging experience for your EV.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

Three-phase smart/intelligent charger for electric cars, motorcycles and bicycles or plug-in hybrid.

Attractive design, simple use and easy installation in both private homes, housing complexes, offices, shopping centers, hospitals, companies, etc.

Charging modulator that takes into account the home's consumption and adjusts the power requirement to achieve the highest recharge in the shortest possible time without exceeding the maximum current that the home has available.

Transformer measurement of the home's total consumption (transformer is included).

Limiting the maximum current through the selector on the device or via the App.

With 5 meter charging cable. Charging Mode 3 with plug Type 2 according to EN 62196.

Built-in DC filter – (RDC-DD) – Therefore only protected with Combi/Aut, 16-32A, Type A.

Wi-Fi communication / Ethernet

From the mobile phone with the VIARIS APP, we can see the status, download an Excel file with the consumption history of the charger and the installation and a list of users.

Remote firmware update

Notifications for App.

OCPP Communication Protocol 1.6.

Programming of charging time via App.

LED signaling of VIARIS UNI and vehicle status.

Touch or RFID activation.

Input for external control (payment system, locking system, etc.)

Output for control of ventilation

IK10 PC cabinet with high impact strength and high deformation temperature.

Degree of tightness IP54.

Please note that the charging box must be installed and removed by an authorized installer, otherwise the warranty will be void.

MID certified and ready for bi-directional use. The Edge Max has all the groundbreaking features of the Edge 2, the MID certified option for small site installations. Perfect for advanced home use. The Edge Max features a display for easy data overview.

In addition to being universal and delivering up to 22 kW of energy, the Edge Max can deliver bi-directional capacity, local and cloud-based load and phase balancing, and groundbreaking solar charging features. This powerful charger is everything you need and more for home and small site installations. It pairs easily with the NexBlue Zen to support dynamic load balancing.

Kabel zasilający przedłużający, IEC 62196 Type 2 męski zatyczka ochronna do IEC 62196 Type 2 żeński zatyczka ochronna, 10 m, czarny, spiralny, jednofazowy

13.56MHz RFID tags in the form of a key fob for your go-e Charger. Authorise and personalise charging, View charged kWh, Use in combination with go-e app.

Uchwyt kablowy

Naścienna ładowarka EV Besen SQ20-11KW-APP zapewnia ładowanie do 11 kW z kontrolą w aplikacji Bluetooth, kolorowym wyświetlaczem LCD 8.9 cm oraz obudową o klasie IP66.

Zaprojektowana do środowisk prywatnych i komercyjnych, ta ładowarka samochodu elektrycznego obsługuje złącza SAE J1772, IEC 62196-2 oraz GB/T z wyjściem do 32 A. Aplikacja Bluetooth umożliwia zdalny start/stop, harmonogram, regulację prądu oraz dostęp do szczegółowej historii ładowania, a wbudowana diagnostyka i bezprzewodowe aktualizacje oprogramowania pomagają utrzymać niezawodne działanie.

• Kolorowy wyświetlacz LCD 8.9 cm pokazuje na żywo czas, napięcie, prąd, temperaturę i zużycie energii
• Zdalne harmonogramowanie i monitorowanie sesji przez aplikację Bluetooth
• Automatyczna diagnostyka usterek dzięki smart chip
• Obsługa bezprzewodowych aktualizacji oprogramowania
• Zabezpieczenia przed przepięciem, przegrzaniem, przeciążeniem, zwarciem, upływem do ziemi i uderzeniem pioruna
• Obudowa o klasie IP66 zapewniająca odporność na kurz i wodę

Czytelny status na żywo, elastyczne sterowanie w aplikacji i solidna ochrona ułatwiają codzienne zarządzanie ładowaniem.

Black type 2 charging cable for a maximum charging power of 22 kW (length: 7.5 m) suitable for all electric cars with type 2 plug and for all charging stations with type 2 socket. Practical accessory for every go-e Charger (11 kW / 22 kW) and other charging stations with type 2 socket.

Uchwyt kablowy, biały

Adapter cable for connecting the go-e Charger Gemini flex 11 kW and Gemini flex 2.0 11 kW to: a CEE red 32 A socket. Note that your electric car will still be charged with a maximum of 16 A with this adapter.

(5555934032) 32 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

The go-e Charger Gemini 11 kW is a smart wallbox in a timeless design for installation at a fixed location indoors and outdoors. The go-e Charger charges electric cars and plug-in hybrids easily, quickly and safely.

Easee Equalizer Amp

Stacja dokująca EV, 3.5 kW, 16 A (IEC 62196 Type 2)

(5555935015) 32 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP HELIX Type 2 charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

With the different Zaptec Go front covers you can give your charger a new look without the help of an electrician. Simply remove two screws from the bottom of the charging box and carefully tilt the cover towards you to release it. For the Zaptec Go there are six different colors to choose from.

Also suitable for the Zaptec Go 2.

(5555934029) 20 A, 3 phases, for charging hybrid and electric cars with Type 2 connection.

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).

(5555934030) 32 A, 1 phase, for charging hybrid and electric cars with Type 2 connection.

LAPP Type 2 standard charging cables connect your EV to the charging station, charging pole or wallbox - for easy charging at home or on the road. Simply connect the coupling of the cable to the car and the plug to the power source. The charging process is automatically started and finished by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).