Ogrzewanie podłogowe - strona 5

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Used on Uponor manifold

Used in Roth Basicline floorheating system

universal efficient insulation for roth manifold, both for radiantheating and domestic tapwater

Used for floorheating systems

Kompletny system kolektorów, wejście i wyjście, wraz z uchwytami, łącznikami o średnicy 20 mm i końcówkami. 5 wyjść.

Paralelny rozgałęźnik z pompą UPM3 15/70.

Dla tych, którzy chcą korzystać z temperatury podaży opartej na popycie. Funkcje: Aktuator termiczny • Specjalny aktuator dla funkcjonalności temperatury podaży opartej na popycie • IP54, chroniony przed pyłem i zachlapaniem wodą

230V Wireless 4-zone expansion box for Salus iT600 Underfloor heating system.

Uponor Smatrix sensor floor/remote S-1XX

Amplifier for Salus iT600 heating system ZigBee signal.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Danfoss FHV-R. Samoregulujący zawór ograniczający temperaturę podłogową FHV-R zapewnia kontrolę temperatury obiegu ogrzewania podłogowego przy użyciu limitera temperatury powrotu FJVR. Zawór jest zaprojektowany do wbudowania w ścianę stałą lub działową, co pozwala na wykorzystanie tylko rurki z czujnikiem

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Dla tych, którzy chcą kontrolować system za pomocą aplikacji na smartfonieFunkcje modułu aplikacji• Połączenie Wi-Fi• Aplikacja Android• Aplikacja Apple• Zmiana temperatury• Zmiana harmonogramu czasowego

Danfoss Część końcowa - Końcówki, uchwyty i inne akcesoria do kolektorów FHF. Końcówka z ręcznym odpowietrznikiem powietrza

Pre-paired set for 1 circuit underfloor heating incl. Quantum thermostat.

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Narzędzie do mocowania klipsów rurowych do rur ogrzewania podłogowego na izolacji. Używane z klipsami Unite.

Zestaw izolacyjny Uponor do dystrybutora podłogowego.

Used for floorheating systems

Moduł niewolnika Uponor Smatrix Wave M-160

Salus under floor heating system paired and ready for use - 5 zones.