Produkty odwadniające - strona 32

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

For shower cubicles without fixed walls.

The drain unit has four floor flanges.

Including four heght-adjustable feet (40-190 mm).

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile).

The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame.

The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

The grating is selected from among six attractive designs.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

System Wafix PP jest wykonany z wielokrotnie użytecznego PP (polipropylen), co daje zarówno rurkom, jak i elementom łączącym dobre właściwości fizyczne i chemiczne. Użyty materiał PP ma wysoki moduł E, co zapewnia rurkom dobrą sztywność na długość oraz dużą wytrzymałość na uderzenia. Dlatego system Wafix PP wytrzymuje wpływ sił uderzeniowych, które mogą występować podczas instalacji i eksploatacji - nawet w temperaturach poniżej zera. System Wafix PP to kompletny system odprowadzania wody opadowej składający się z rurek i elementów łączących o wymiarach: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm Program dostępny jest również w białej wersji o wymiarach:Ø32,Ø40 orazØ50mm,szczególnie odpowiedniej do instalacji widocznych.System unikalnego pierścienia uszczelniającego Fix·lock® uszczelnia aż trzy punkty zapewniając duże powierzchnie konstrukcyjną przylegającą do rury oraz gwarantując szczelność połączeń każdorazowo.Zapewnia dodatkowe bezpieczeństwo przy wkładaniu lub ukrywaniu rurek w szybie.

Wavin PVC plug 250mm

Wavin PVC transition 200mm, for clay or concrete pipe

Wavin PVC branch pipe 45° 400/160mm

Wavin PVC bend 15° 400mm

Wavin PVC branch pipe 45° 315/160mm

Wavin PVC branch pipe 45° 250/160mm

Wavin PP sewer pipe 160x1000mm SN8 EN13476

Wavin PVC branch pipe 45° 250/110mm

Wavin PVC reduction 400-315mm

Wavin PVC bend 15° 250mm

Wavin PVC double sleeve 315mm

Wavin PVC reduction 250-200mm