A unique Ringke Fusion X case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches, and also does not significantly affect the appearance by revealing the back panel of the phone. The case has taken on the character of an armored case, as it differs from the basic version with corner extensions, which strengthens and protects these sensitive parts of the phone. Thanks to the added special embossing on the edges, the phone in the case fits much more securely in the hand. Recommended especially for everyday practical protection of the device.

The Fusion X has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

Slim and lightweight overlays designed to fit perfectly. Ringke Slim is a stylish way to diversify and protect our Watch.

High-quality PC material protects against scratches and bumps.

The case + glass from Ringke isa complex solution that will protect your watch from all threats. Slim and lightweight PC overlay designed to fit perfectly. Slim is a stylish way to diversify and protect your smartwatch screen.

High-quality tempered glass is the perfect way to protect the screen from scratches and impacts. It has a hardness of 9H, which allows for effective protection of the display, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of a die cut prepared by the manufacturer of a given model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of mounting tools.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Onyx series case from Ringke is made of soft and durable thermoplastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

Ringke Fusion is a hybrid case that combines solid protection with a minimalist design. Made of flexible polycarbonate reinforced with shock-absorbing TPU plastic, it provides effective protection against falls and scratches. The transparent back allows you to maintain the original look of the phone while protecting it from everyday damage. The lightweight design does not add unnecessary dimensions, while maintaining the slim profile of the device.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces. Covering with two layers - antistatic to prevent dust collection and minimizing scratches - ensures a long-lasting aesthetic appearance.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The case has an additional cutout for mounting a lanyard. The one-piece design makes assembly and disassembly simple and quick, making the case practical for everyday use.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

The Onyx Magnetic Magsafe case from Ringke is made of soft and durable thermoplastic plastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

A unique Ringke Fusion case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

Slim and lightweight overlays designed to fit perfectly. Ringke Slim is a stylish way to diversify and protect our Watch.
High-quality PC material protects against scratches and bumps.

Slim and lightweight overlays designed to fit perfectly. Ringke Slim is a stylish way to diversify and protect our Watch.
High-quality PC material protects against scratches and bumps.

A unique Ringke Fusion case, the undoubted advantage of which is its small size in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

Ringke Invisible Defender is a high-quality tempered glass that combines extraordinary durability with great comfort of use. The accessory has a multi-layer structure and a hardness of 9H (on the Mohs scale), which, together with the oleophobic coating, guarantees excellent protection against damage and dirt. In addition, the cover is splinter free (so-called safety glass), so even in the event of a break, it will not break into dozens of sharp pieces.

ID Glass is extremely thin (its thickness is only 0.33 mm), does not negatively affect the touch in any way, and thanks to its high transparency, it offers a razor-sharp image. In addition, they are equipped with rounded 2.5D edges and precise cutouts for all necessary elements, such as the front speaker or camera lens.

The Onyx Magnetic Magsafe series case from Ringke is made of soft and durable thermoplastic plastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

A unique case, the undoubted advantage of which is its small dimensions in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches, and it also does not significantly affect the appearance by revealing the back panel of the phone. The case has taken on the character of an armored case, as it differs from the basic version with corner extensions, which strengthens and protects these sensitive parts of the phone. Thanks to the added special embossing on the edges, the phone in the case fits much more securely in the hand. Recommended especially for everyday practical protection of the device.

The Fusion X has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.

All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

The Onyx series case from Ringke is made of soft and durable thermoplastic, additionally reinforced at the edges to protect the device as best as possible. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports and a lanyard.

This housing is covered with a matte-granular structure with anti-slip properties. It effectively protects the device from scratches and abolishes all forms of user activity. It provides high grip and comfort of use, while maintaining an elegant style.

Onyx is a cover that has been subjected to drop performance tests 26 times from a height of up to 1.2m, thus receiving the US military certificate MIL-STD 810G-516.6.

A unique case, the undoubted advantage of which is its small dimensions in relation to the protection offered.

Made of flexible polycarbonate, additionally reinforced with shock-absorbing TPU plastic. The whole thing perfectly eliminates any falls and protects against scratches. The case does not significantly affect the appearance and significantly improves the reliability and comfort of holding the phone in the hand. Recommended especially for everyday practical protection of the device.

The Ringke Fusion Magsafe features a magnetic ring compatible with the MagSafe wireless charger for quick and easy charging.

The Fusion has been subjected to fitness tests and has received MIL STD 810G-516.6 certification, which means that it has fallen 26 times from a height of 2 meters.
All Ringke products are tested for abrasion resistance and a precise fit to deliver a high-quality case.

Crystal clear protective film covering the entire surface of the screen. It is made of high-quality urethane polycarbonate and has scratch resistance, which effectively protects the screen from damage. The film perfectly renders the displayed colors and has a special anti-grease coating that protects the screen from leaving fingerprints.

Its additional advantage is the ability to match most cases available on the market - no more problem with choosing a case for the screen protector used!
Installation of the film is extremely easy and accessible to every user, as the film has been designed in such a way that it does not leave air bubbles after application.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can.

Ringke Fusion X is a rugged hybrid case that combines maximum protection with a distinctive design. Made of two layers - flexible thermopolyurethane (TPU) and hard polycarbonate (PC) - it provides effective protection against falls and damage. The black frame contrasts with the transparent back, creating a sporty look and emphasizing the phone's original design. The lightweight design maintains the slim profile of the device while providing a secure and stable grip.

The case is Mil-Grade military certified, which confirms its durability. Shock Absorption technology in the corners absorbs shocks and shocks, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect these sensitive components from contact with flat surfaces.

Precise cutouts allow you to freely access all the functions of the phone. Integrated button covers made with ActiveTouch technology guarantee full responsiveness without sacrificing sensitivity. The one-piece design makes assembly and disassembly simple and quick, making the case practical for everyday use.

The Silicone Magsafe case from Ringke is made of soft and durable thermoplastic, which makes it ultralight thanks to its thin design. The case is a perfect fit and does not limit the possibility of wireless charging.

The Silicone is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

The case does not significantly enlarge the phone, but it makes it fit firmly and stably in the hand. The slightly raised form of the case around the camera and screen protects it from scratches, lifting the phone just above a flat surface. It has covers for buttons, cutouts for ports.

Ideal for users who value high quality workmanship without having to increase the volume or weight of the device.