Rury ciśnieniowe i złączki - strona 48

XPress Carbon elbow 90 deg. FF 108

XPress Carbon straight connector FF 22XRp3/4

XPress Carbon threaded T-piece FFF 35XRp3/4X35

XPress Węgiel prosty kpl. FF 42

XPress Stainless elbow 90 deg. FF 35

XPress Stainless T-piece FFF 28

XPress Węglowy prosty łącznik ØF 18XRp1/2

XPress Stainless threaded T-piece FFF 18XRp3/4X18

Łokieć ze stali nierdzewnej XPress 45 stopni FF 88,9

Reduktor ze stali nierdzewnej XPress FØ 18X28

Reduktor ze stali nierdzewnej XPress FØ 18X35

XPress Stainless threaded T-piece FFF 76.1XRp2X76.1

XPress Stainless prosty łącznik FM 88.9XR3

The Geberit Mapress electro-galvanized press fitting system can be used for joining pipes in closed hot and cold water systems as well as sprinkler systems, fire-fighting water pipes and compressed air networks. Mapress electro-galvanized fittings are made of unalloyed steel. The press joining of pipes and fittings must be carried out with press jaws with an M-profile. When pressing, the pipe is inserted into the press fitting to the marked insertion depth and is thus pressed together.

Please note that Geberit Mapress pipes should be cut to size with a regular pipe cutter before use, and then deburred both inside and outside with a suitable deburring tool. Cutting and deburring are important precisely to avoid damage to the O-ring when the pipe is inserted into the press fitting.

Viega 2415

Geberit Mapress Złącze ze stali nierdzewnej z nakrętką z CrNi: d=35mm

Viega 2315

Sanpress Inox Adapter łokieć 90° z SC-Contur-stal nierdzewna-połączenie press, gwint Rp, polygonComponentsEPDM element uszczelniający: 15, Rp: 12

Viega 2211

Viega 2216.1XL

Do celów sanitarnych i przemysłowych, do systemów grzewczych, chłodniczych i przemysłowych.

Redukcja ze stali nierdzewnej XPress FØ 15X22

Profipress T-kawałek z SC-Contur - miedziane złączki prasowe, elementy uszczelniające EPDM d1: 18, d2: 15, d3: 18

XPress Carbon straight coupling FF 54

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene