Systemy Alu pex - strona 20

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Kąt naciskowy PPSU Uponor 90° 32 mm

Adapter Geberit Mepla z gwintem męskim: d=26mm, R=3/4

Geberit Mepla łokieć: 45°, d=32mm

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Uponor 1070540 armatura sanitarna Kolano

Uponor 1070539 armatura sanitarna Kolano

Geberit Mepla reduktor: d=26mm, d1=16mm

Uponor 1029146 armatura sanitarna Reduktor końcowego końca

Adapter złączkowy Geberit Mepla z gwintem męskim: d=20mm, R=1/2, G=3/4

Uponor 1070516 armatura sanitarna Przejściówka do kranu

Uponor 1046901 armatura sanitarna Przejściówka do kranu

Uponor 1029126 armatura sanitarna Przejściówka do kranu

Henco łokieć naciskowy PVDF 26 x 26 mm 90° do instalacji wodnych, grzewczych i chłodniczych. Maksymalne ciśnienie robocze: 16 bar.

Złącze do podgrzewacza wody użytkowej i systemów grzejnikowych. Plastik PPSU z nakrętką ze stali nierdzewnej / aluminium, gwarantujące brak przecieków, jeśli nie zostanie naciśnięte. Bez kalibracji. Do stosowania tylko z rurami Uponor MLC i narzędziami do naciskania zatwierdzonymi przez Uponor.

Uponor 1070598 armatura sanitarna Trójnik kompresyjny

Uponor 1046918 armatura sanitarna Reduktor końcowego końca

Uponor 1046905 armatura sanitarna Przejściówka do kranu

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f