Tech-Protect - strona 58

The Tech-Protect Silicone Hook case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities of use - the headphones can be attached to a leash with keys or a loop in the pants, thanks to which falling or losing the set becomes almost impossible.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Stylish and simple design and a high level of protection are synonymous with the new Magmat case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will ensure the unique look of your smartphone.

The Tech-Protect Magmat MagSafe case combines elegant design with the highest level of protection. The hybrid design uses high-quality TPU and PC components, guaranteeing comprehensive protection for your smartphone.

The flexible frame made of polyurethane plastic perfectly absorbs impacts and protects the phone during falls, while the hard polycarbonate back effectively protects against scratches and mechanical damage. The transparent finish emphasizes the original appearance of the device, while maintaining its unique character.

The raised form of the housing around the camera and screen protects the most sensitive components from contact with a flat surface. The built-in magnetic ring ensures full MagSafe compatibility, allowing you to use magnetic accessories. Precise cutouts guarantee full access to all ports, buttons and speakers.

A robust and durable UltraBoost Evo cable from the Tech-Protect brand, which will allow you to charge all devices with a USB-C connector in no time and, above all, safely. The cable gives the possibility of replenishing energy with a power of up to 100W. The fast charging function does not cause overload or overheating, and the fire-resistant material used will additionally protect the accessory during use.

UltraBoost also provides the ability to provide a stable and reliable connection - data transfer speeds of up to 480MB/sec.

Made of high-quality components - copper wire core, aluminum reinforcement at the ends and non-bending and cracking nylon braid. The damage-resistant design protects the cable from breakage, breakage, abrasion or other damage caused by everyday use.

Stylish and simple design and a high level of protection are synonymous with the new Magmat case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane plastic will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will give your smartphone a unique look.
The slightly raised form of the case around the camera and screen protects against damage by lifting the phone just above a flat surface.

The Magmat also features a magnetic ring compatible with the MagSafe wireless charger for quick and easy charging.

The C30W universal mains charger is the ability to quickly and, above all, safely renew energy in devices such as smartphones, portable consoles, power banks or tablets.

Equipped with USB-C (PD30W) and USB-A (QC3.0) power ports, it allows you to charge two devices at the same time.
The Quick Charge and Power Delivery technologies minimize charging time by instantly increasing the power of the devices, and the safety systems protect the device from harmful overloads.

The accessory has an intelligent management system that adjusts the optimal voltage to a specific equipment.
Your device will get exactly the amount of current it needs to recover in the shortest possible time, without the risk of damaging the battery.

Its ultra-lightweight and compact design means it fits in any purse, backpack or suitcase, meaning you can have it with you on every trip.

The Tech-Protect Magmat case combines elegant design with the highest level of protection. The hybrid design uses high-quality TPU and PC components, guaranteeing comprehensive protection for your smartphone.

The flexible frame made of polyurethane plastic perfectly absorbs impacts and protects the phone during falls, while the hard polycarbonate back effectively protects against scratches and mechanical damage. The precision-fitting design provides perfect protection without unnecessary compromise.

The raised form of the housing around the camera and screen protects the most sensitive components from contact with a flat surface. Precise cutouts guarantee full access to all ports, buttons and speakers, without restricting any functionality of the device.

The Tech-Protect Hydro flex+ hydrogel film is a modern screen protector that combines flexibility and durability. Made of high-quality TPU plastic, it perfectly adapts to any surface of the screen, including its curved edges.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage during everyday use. The film has innovative self-healing properties that allow for self-smoothing of minor scratches caused during the operation of the device. Despite its advanced protection, the film maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged sensitivity of the touchscreen.

Thanks to the flexibility of the TPU material, the installation of the film is simple and intuitive, and the end result guarantees almost invisible protection that does not affect the aesthetics or functionality of the smartphone.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Rubber strap dedicated to Samsung Galaxy Watch. Crafted with attention to detail in TPU material with an extremely pleasant finish.
The product is fully functional and can be adjusted according to individual needs.

The manufacturer has taken care of the details and prepared a top-class product.

Our accessories are perfectly matched and fully compatible with: Samsung Galaxy Watch 4 / 5 / 5 Pro / 6 / 7 / FE (40 / 42 / 43 / 44 / 45 / 46 / 47 mm).

Tech-Protect's 4-in-1 all-in-one device designed for all laptops with USB Type-C input.
The compact adapter allows you to charge and synchronize the data of multiple devices at the same time.

Tech-Protect V2 is an indispensable gadget that will easily increase the capabilities of your laptop or computer, and make your work much easier.

*Video transmission via HDMI is only possible if the device manufacturer meets the appropriate standard. See if the USB Type-C port on your device supports video broadcasting.

* The USB-C socket is only used as a by-pass for charging the device to which the HUB is connected (laptop, smartphone). It does not support data transmission.

Tech-Protect MagCam is a stylish case that combines a simple design with a high level of protection. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane plastic perfectly protects against shocks and falls, while the hard polycarbonate back protects your phone from scratches.

The built-in magnetic ring, compatible with MagSafe accessories, gives you the ability to charge wirelessly without having to remove the case from your phone. You can use charging anytime, anywhere, without any obstacles. The case is equipped with a metal frame around the lenses, which will provide effective protection of the camera, lamp and sensors from scratches and damage.

The transparent finish retains the original look of your phone. The subdued and elegant design emphasizes the aesthetics of the device, and the one-piece design makes assembly and disassembly simple and quick.

Przewodowe słuchawki Tech-Protect Ultraboost Core G4 to czarne słuchawki douszne ze złączem 3.5 mm, pasmem przenoszenia 20-20,000 Hz, transmisją 16bit/44.1kHz oraz pilotem na kablu do muzyki i połączeń.

Wykonane z materiałów ABS i TPE, zaprojektowano je do lekkiego, wygodnego noszenia dzięki ergonomicznemu dopasowaniu oraz stabilnemu połączeniu z urządzeniami ze standardowym gniazdem audio.

• Złącze mini jack 3.5 mm
• Pasmo przenoszenia 20-20,000 Hz
• Cyfrowa transmisja 16bit / 44.1kHz
• Czułość 103 ± 3 dB
• Impedancja 32Ω ± 20%
• Pilot do zmiany utworów, pauzy, regulacji głośności i obsługi połączeń

Zaprojektowane do codziennego słuchania, podróży, pracy i treningów, łączą czysty dźwięk, wygodne dopasowanie i praktyczne sterowanie na kablu.

Convenient and practical set of C20W charger and cable with Lightning connector from the Tech-Protect brand.

Dual-port USB-C (PD20W) and USB-A (QC3.0) chargers are the ability to quickly and, above all, safely restore power in mobile devices. The Quick Charge and Power Delivery technologies minimize charging time by instantly increasing the power of the devices, and the safety systems protect the device from harmful overloads. The accessory has an intelligent management system that adjusts the optimal voltage to a specific equipment.

Flexible and durable PD20W fast charging cable allows you to charge Apple devices in no time. Made of a combination of high-quality materials - galvanized copper (cable core) and TPE coating - flexible and durable - with additional reinforcement at the ends.
The cable also allows you to send data at speeds of up to 480MB/sec.

The Tech-Protect NC200W-GaN is a 200W AC charger that uses GaN (gallium nitride) technology to charge devices efficiently. With four ports, you can power your laptop, tablet, smartphone, and other accessories at the same time, making it a practical solution for those who work with multiple devices on a daily basis.

Equipped with three Type-C ports and one USB-A port with significant power, the charger offers unlimited possibilities. The two main Type-C ports can deliver 100W each at the same time, allowing you to charge two premium laptops at the same time in a flash. The Type-C3 port offers a robust 65W, perfect for ultrabook or Pro tablets, while the USB-A port delivers an impressive 60W with Super Charge support. All four ports can work simultaneously with intelligent power distribution.

An advanced power management system with Power Delivery and Quick Charge 3.0 protocols automatically optimizes charging parameters for each connected device, guaranteeing maximum speed and safety. The compact design makes the charger take up little space and looks good both at home, in the office or on the go. The Tech-Protect NC200W-GAN is absolute power in a compact form factor – the ideal charging station for the most demanding users.

Tech-Protect UltraBoost is a magnetic inductive charger dedicated to Apple watches. The convenient device is a quick and safe way to wirelessly recharge the power of your Smart Watch. The charger works on the principle of induction, it contains a magnet placed on its surface, which attracts the watch and allows charging without the need for a cable.

The small size of the accessory is easy to carry, takes up little space and can be easily taken with you on trips or travels - more convenience and mobility in everyday life.

The Tech-Protect UltraBoost charger is very easy to use - just place your Apple Watch on its surface and the charging process starts automatically.

Tech-Protect UltraBoost DNA is a reliable cable designed for Apple device users who are looking for durability and high quality in everyday charging. Support for 15W charging and 3A current guarantees fast and safe power replenishment and smooth data transfer, ideal for smartphones, tablets and other devices with a Lightning connector.

The durable nylon braid protects the cable from mechanical damage, and its tangle resistance increases the comfort of use. The reinforced construction and robust ends ensure durability, even with heavy use. Tech-Protect UltraBoost DNA is the perfect solution for home, office and travel, combining functionality with modern design.

Choose the quality you can rely on and order today to enjoy comfort and reliability every day!

The Tech-Protect FlexAir Hybrid MagSafe is an advanced combination of flexible TPU and hard PC polycarbonate with a built-in magnetic ring for full compatibility with MagSafe accessories. The hybrid design combines flexible sides with a hard back, offering enhanced protection against scratches and stronger impacts. The transparent design allows you to fully appreciate the original appearance of the smartphone, without covering its design.

The built-in magnetic ring allows wireless charging and a stable connection to MagSafe chargers, mounts and wallets without having to remove the case. The magnets hold firmly on the accessories, ensuring a secure hold in any situation. The double-layer structure effectively absorbs impact energy, reducing the risk of damage to your phone in a fall. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

The FlexAir Hybrid MagSafe is ideal for those looking for enhanced protection with MagSafe functionality. The combination of two materials and magnetic technology guarantees long-term protection and comfort of use of magnetic accessories.

The Defense series case from Tech-Protect is an extremely resistant case.
The cover is one of the most complete and durable products in our entire range.
The case consists of two elements: a frame entwining the edges of the phone with an integrated hybrid glass with a hardness of 5H, and hybrid armor worn on the back of the device.

The whole thing is made of a mixture of soft thermoplastic and a curing polycarbonate coating. Both parts come together thanks to the "Snap-On" design.

The slightly raised form of the bezel around the camera and screen protects it from scratches, lifting the phone just above a flat surface.

Slim and light Tech-Protect Defense case with built-in tempered glass designed to fit perfectly against the screen. Defense from Tech-Protect is a stylish way to fully protect your watch from scratches, bumps and everyday mechanical damage.

The integrated tempered glass does not affect touch sensitivity or image quality – the watch remains as intuitive to use as without protection. The slim case does not add unnecessary bulk and does not make it difficult to put on or take off the watch. Precise cutouts give you full access to all buttons and ports.

During installation, the surface of the screen should be degreased with an alcohol-based liquid – the necessary installation kit is included in the set.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

The Tech-Protect Wallet case made entirely of eco-leather is comfortable and durable to use, and at the same time elegant, in a classic style and original design.

One of the main features of the cover is the stand function, thanks to which the user can freely watch videos, use video calls or view content in landscape mode, without having to hold the phone in his hand. The case provides a stable support for the phone, which increases the comfort of use.

In addition, it has a convenient place for documents, credit cards or cash. Thanks to this, you can always have all the most important things with you. A practical and functional solution for people who value convenience and organization.

It is worth noting that the Tech-Protect Wallet case is refined in every detail. The stitching adds a stylish character to it and at the same time enhances its durability. Mounted on a base made of TPU, a flexible but durable material, it protects the phone from accidental falls, scratches and other damage.

The magnetic closure makes closing and opening the case quick and simple, while keeping your phone safe and secure inside.

A classic, one-piece Flexair Hybrid Magsafe case from Tech-Protect with a transparent finish, created to emphasize the lines and original silhouette of the device.
The hybrid design is a combination of a rigid polycarbonate back and a durable, flexible frame around it. The whole will provide excellent protection against scratches and damage, while maintaining a slim and light design.

The perfectly fitted case fits snugly to the device, increasing the comfort of its use, and precisely made notches do not limit the functionality - free access to buttons and ports. The slightly raised form of the case around the camera and screen will protect against scratches, lifting the phone just above a flat surface.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

The Tech-Protect Wallet case made entirely of eco-leather is comfortable and durable to use, and at the same time elegant, in a classic style and original design.

One of the main features of the cover is the stand function, thanks to which the user can freely watch videos, use video calls or view content in landscape mode, without having to hold the phone in his hand. The case provides a stable support for the phone, which increases the comfort of use.

In addition, it has a convenient place for documents, credit cards or cash. Thanks to this, you can always have all the most important things with you. A practical and functional solution for people who value convenience and organization.

It is worth noting that the Tech-Protect Wallet case is refined in every detail. The stitching adds a stylish character to it and at the same time enhances its durability. Mounted on a base made of TPU, a flexible but durable material, it protects the phone from accidental falls, scratches and other damage.

The magnetic closure makes closing and opening the case quick and simple, while keeping your phone safe and secure inside.