Tech-Protect Telefon - szkło ochronne

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect 5906302361236 ochraniacz na ekran / tył telefonu Przezroczysta ochrona ekranu Motorola 2 szt.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass, only 0.3mm thick.

The perfectly fitted design fully preserves the touchscreen's sensitivity. The manufacturer rates its hardness at 9H on a 10-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is crystal clear, preserving natural colors and display sharpness. An additional advantage is a special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.

* Due to the various milling patterns on display edges, a slight air halo may appear around the screen after installing a screen protector! This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

Tech-Protect Camring Fit+ is a camera cover that combines aluminum and tempered glass that protects your smartphone's lenses from scratches and bumps. Included is a mounting frame that guides the installation precisely and ensures that each slide is positioned perfectly. It's a sleek protection that doesn't interfere with the camera or affect the quality of your photos.

An aluminum frame surrounds the camera module, creating the first line of defense against impacts and contact with surfaces. Tempered glass covers each lens separately, protecting it from scratches from keys, sand, and other sharp objects. The design is precise enough to not affect autofocus, white balance or the quality of the footage. The black color scheme blends perfectly with most cases and adds a premium character to the phone.

The Camring Fit+ mounting system is designed for simplicity and reliability of installation. A dedicated frame guides each slide to the right place, eliminating the risk of inaccurate seating. Once installed, the cover remains invisible in daily use, preserving the full functionality of the camera. It is a comprehensive protection of the photo module without compromising on the quality of photos.

Tech-Protect Camfull Fit+ is a high-quality camera cover made of hybrid glass. It provides comprehensive protection of your smartphone's lenses against scratches, mechanical damage and everyday dirt, while maintaining the elegant appearance of the device.

Hybrid glass combines the advantages of tempered hard glass with the flexibility of polymers, creating a robust protective barrier against impact and contact with various surfaces. The cover covers each lens, protecting it from scratches from keys, sand, coins, and other sharp objects. Thanks to its precise workmanship and slim design, it does not affect the operation of the camera, and the quality of photos and videos is the same as without the cover.

Installing the Camfull Fit+ is simple and intuitive – the precise fit ensures perfect alignment with the camera module. Once installed, the cover holds stably for a long time, does not peel off and does not move during daily use. It's a reliable solution for anyone who wants to maintain the perfect condition of their camera without compromising on functionality and aesthetics.

The Tech-Protect Hydro flex+ hydrogel film is a modern screen protector that combines flexibility and durability. Made of high-quality TPU plastic, it perfectly adapts to any surface of the screen, including its curved edges.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage during everyday use. The film has innovative self-healing properties that allow for self-smoothing of minor scratches caused during the operation of the device. Despite its advanced protection, the film maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged sensitivity of the touchscreen.

In the set you get as many as two protective films along with complete installation kits, which allows you to protect your device for a long time. Thanks to the flexibility of the TPU material, the installation of the film is simple and intuitive, and the end result guarantees almost invisible protection that does not affect the aesthetics or functionality of the smartphone.

The Tech-Protect Hydro flex+ hydrogel film is a modern screen protector that combines flexibility and durability. Made of high-quality TPU plastic, it perfectly adapts to any surface of the screen, including its curved edges.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage during everyday use. The film has innovative self-healing properties that allow for self-smoothing of minor scratches caused during the operation of the device. Despite its advanced protection, the film maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged sensitivity of the touchscreen.

In the set you get as many as two protective films along with complete installation kits, which allows you to protect your device for a long time. Thanks to the flexibility of the TPU material, the installation of the film is simple and intuitive, and the end result guarantees almost invisible protection that does not affect the aesthetics or functionality of the smartphone.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Camring Fit+ is a camera cover that combines aluminum and tempered glass that protects your smartphone's lenses from scratches and bumps. Included is a mounting frame that guides the installation precisely and ensures that each slide is positioned perfectly. It's a sleek protection that doesn't interfere with the camera or affect the quality of your photos.

An aluminum frame surrounds the camera module, creating the first line of defense against impacts and contact with surfaces. Tempered glass covers each lens separately, protecting it from scratches from keys, sand, and other sharp objects. The design is precise enough to not affect autofocus, white balance or the quality of the footage. The color scheme blends perfectly with most cases and adds a premium character to the phone.

The Camring Fit+ mounting system is designed for simplicity and reliability of installation. A dedicated frame guides each slide to the right place, eliminating the risk of inaccurate seating. Once installed, the cover remains invisible in daily use, preserving the full functionality of the camera. It is a comprehensive protection of the photo module without compromising on the quality of photos.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Bundle 10-Pack Tempered Glass is a comprehensive set of high-quality screen protectors, designed for users who want maximum protection and reliability on a daily basis. Each glass in the set is made of durable, tempered material with a hardness of 9H, thanks to which it effectively protects the screen of the device from scratches, bumps and damage resulting from intensive use.

The ultra-thin design provides full clarity and does not affect touch sensitivity, guaranteeing a smooth, natural smartphone experience. With a precise cutout and a perfect fit, the glass adheres perfectly to the screen, while the oleophobic coating minimizes fingerprints and smudges.

A set of 10 pieces is an economical and convenient solution for both people who have several devices and for those who want to have spare protection always at hand. It is also a great proposition for services and sellers of GSM accessories.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Hydro flex+ hydrogel film is an advanced protective solution. Made of high-quality flexible TPU plastic, it adapts perfectly to any screen surface.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage. The film also has innovative self-healing properties that allow it to "heal" minor scratches caused by everyday use. At the same time, it maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged touch sensitivity.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can with positioning stickers.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible. Leave smaller blisters and unevenness on their own within 24-48 hours.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile of the smartphone and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and sharpness of the image. The glass design ensures compatibility with most available cases.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass, only 0.3mm thick.

The perfectly fitted design fully preserves the touchscreen's sensitivity. The manufacturer rates its hardness at 9H on a 10-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is crystal clear, preserving natural colors and display sharpness. An additional advantage is a special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.

* Due to the various milling patterns on display edges, a slight air halo may appear around the screen after installing a screen protector! This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

The Tech-Protect Hydro flex+ hydrogel film is a modern screen protector that combines flexibility and durability. Made of high-quality TPU plastic, it perfectly adapts to any surface of the screen, including its curved edges.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage during everyday use. The film has innovative self-healing properties that allow for self-smoothing of minor scratches caused during the operation of the device. Despite its advanced protection, the film maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged sensitivity of the touchscreen.

In the set you get as many as two protective films along with complete installation kits, which allows you to protect your device for a long time. Thanks to the flexibility of the TPU material, the installation of the film is simple and intuitive, and the end result guarantees almost invisible protection that does not affect the aesthetics or functionality of the smartphone.

The Tech-Protect Camalloy Fit+ cover is a precision-crafted accessory that effectively protects the camera module in your smartphone. Made of durable aluminum alloy, it protects against scratches, dirt and minor damage during daily use.

Thanks to its slim design and perfect fit, the hood does not affect the quality of photos or recordings, and its installation is quick and simple – just place it on the camera module to make it snug against the surface.

The minimalist design makes the cover almost invisible, maintaining the elegant appearance of the device. It's a practical and aesthetic solution for people who want to provide their smartphone with maximum protection without sacrificing style.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.