Viega - strona 27

Adapter Prestabo z konturem SC- stal ocynkowana niskostopowa - połączenie prasowe, gwint Rp

Wtyki kołnierzowe Prestabo z ocynkowanej stali niskostopowej, wtyki kołnierzowe z ocynkowanej stali niskostopowej

Viega 2218

Viega 2215.5

Viega 2212.1

Sanpress Inox Adapter z SC-Contur - stal nierdzewna - połączenie press, element uszczelniający EPDM, gwint R, wielokąt, certyfikacja VdS d: 42, R: 112

Viega 95002A

Kolano 90° - miedziane - połączenie lutownicze, zakończenie wtykowe: 28

Viega 2612

Długi sutek - pistoletowy - gwint R: 12, L: 100

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 3092

Śruba montażowa w kolorze brązu artyleryjskiego z gwintem Rp. Rp: 34

Long nipple- gunmetal- R-thread

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Adapter Raxofix z konturem SC, połączenie prasowe ze stopu brązu krzemowego, gwint Rp: 20, Rp: 34

Viega 3241

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 94130G

Viega 2318

Raxofix Wall plate with SC-Contur- silicium bronze- press connection, Rp-threadd: 16, Rp: 12

Sanpress Inox Złącze śrubowe z gwintem G, ze stali nierdzewnej odpornym na korozję, z połączeniem SC-Contur- flat sealingComponentsEPDM element uszczelniający, płaskie uszczelnienie EPDM, nakrętka łącznikowa śrubowa d: 18, G: 34

Reducer - broń metalowa - gwint R, gwint Rp. Składniki wielokątne R: 14, Rp: 18

Śruba z gwintem - mosiądzowa - gwint Rp - uszczelnienie stożkowe

Śruba z gwintem - mosiądzowa - gwint R, gwint Rp - uszczelnienie stożkowe