Viega - strona 4

Viega 2315.5

Pułapka zapachowa rury - do zlewu - plastikowe elementy Łokieć odpływowy 45°, połączenie węża odpływowego G: 112, DN: 50

Sprzęgło - chromowana mosiądz - gwint Rp: 12

Profipress T-kawałek z SC-Contur - miedziane złączki prasowe, elementy uszczelniające EPDM d1: 22, d2: 18, d3: 22

Viega 95240

Viega 2315.1

Pułapka zapachowa do rury - do zlewu - plastikowa G: 112, L: 700, DN: 50

Viega 94270G

Viega 2275.1

Łatwa kula zaworowa - Wejście/wyjście: gwint Rp. Składniki Obudowa zaworu z mosiądzu lub brązu krzemowego zgodnie z DIN 50930-6 / DIN EN 1982, wałek wyboru bezobsługowy, stalowa kula, dźwignia T-formy do sterowania z oznaczeniem środka w kolorze zielono-czerwonym wymiennym. Dane techniczne ciśnienie robocze maks. 1,6 MPa (PN 16), temperatura robocza maks. 110 °C ze znakiem testowym DVGW DN:25, Rp:1'

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Viega 4212

Viega 1115.1

Viega 3090

Long nipple- gunmetal- R-thread

Viega 2426.1

Long nipple- gunmetal- R-thread

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Śruba z gwintem - mosiądzowa - gwint R, gwint Rp - uszczelnienie stożkowe

Adapter łokciowy 90° - mosiądz - połączenie lutowane, gwint Rp: 22, Rp: 34

Viega 2214.2

Sprzęgło - mosiądz - gwint Rp: 1

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Kawałek T - miedź - połączenie lutownicze d1: 15, d2: 15, d3: 15 (pieczęć jakości dla d12-54)

Viega 2415.1