Viega 3241

Viega 2618

Viega 3241

Viega 3092

Viega 3120

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 3241

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Reduktor - mosiądz - gwint R, gwint Rp - okrągły

Viega 3121

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 3241

Długi sutek - pistoletowy - gwint R: 34, L: 70

Long nipple- gunmetal- R-thread

Long nipple- gunmetal- R-thread

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 32, R: 1

Adapter łokciowy Raxofix 90° z konturem SC- połączenie prasowe ze stopu brązu krzemowego, gwint Rp: 32, Rp: 1

Adapter łokciowy Raxofix 90° z konturem SC- połączenie prasowe ze stopu brązu krzemowego, gwint R: 16, R: 34

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 32, d2: 25

Raxofix T-kawałek z SC-Contur - brąz krzemowy - zaciski prasowe d1: 40, d2: 40, d3: 40

Raxofix T-kawałek z SC-Contur - połączeniami prasowymi ze stopu brązu krzemowego d1: 25, d2: 16, d3: 25

Wodoodporna gniazdo połączeniowe do elastycznego polibutenu - nieodpowiednie dla PE-X / AI / PE-X, PE-Xc - mosiądz - gwint Rp - izolacja akustyczna Z kątem w mosiądzu, dysza testu ciśnienia Model 5330

Raxofix T-kawałek z SC-Contur - łącznikiem naciskowym ze stopu krzemu i brązu, gwint Rp-d1: 25, Rp: 34, d2: 25

Sanpress Inox T-kawałek z SC-Contur - stal nierdzewna - łączniki prasowe, elementy uszczelniające EPDM, certyfikacja VdS d1: 54, d2: 22, d3: 54