Viega - strona 7

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Raxofix T-kawałek z SC-Contur - brąz krzemowy - zaciski prasowe d1: 20, d2: 20, d3: 20

Nipple- gunmetal- G-threadG: 1

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Viega 3241

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 3241

Universal valve with stainless steel valve upper part, with plug, plastic valve lower part, silver-coloured.

Pułapka zapachowa do rury - do zlewu - plastikowe elementy Łokieć odpływowy 45°, połączenie węża odpływowego Kontrolowane jakościowo zgodnie z DIN EN 274 G: 112, DN: 50

Rozszerzenie - broń metalowa - gwint R, gwint Rp

Viega 2311

Adapter - gunmetal - połączenie lutowane, gwint Rp: 12, średnica d: 12

Łokieć 45° - miedź - połączenie lutownicze: 12 (pieczęć jakości dla d12-54)

Viega 2317.2

Sanpress Inox Reduktor z SC-Contur - stal nierdzewna, końcówka wtykowa z połączeniem na wcisk. Składniki: element uszczelniający EPDM, d1: 18, d2: 15

Adapter - gunmetal - połączenie lutowane, gwint R: 22, R: 12

Kulowe zawory Easytop z łącznikami SC-Contur- do montażu na wcisk. Składniki: Korpus zaworu z mosiądzu lub brązu krzemowego zgodnie z DIN 50930-6 / DIN EN 1982, wałek wyborczy bezobsługowy, dźwignia T-formy ze znacznikiem środka w kolorze czerwono-zielonym wymiennym, kulka ze stali nierdzewnej, uszczelnienia EPDM. Dane techniczne: ciśnienie robocze maks. 1,6 MPa (PN16), temperatura robocza maks. 110 °C; oznaczenie DVGW-test mark; DN:15;d:15'

Viega 2326

Easytop Slanted seat valve (free-flow valve), with SC-Contur- press connectorsComponentsValve casing and top made of gunmetal or silicium bronze in accordance with DIN 50930-6 / DIN EN 1982, valve seat and valve plate unit stainless steel, spindle transmission, position indication open/closed, ergonomic handwheel and closed with medium marking green/red exchangeable, drain plug G14, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 90 °Cwith DVGW-test markDN: 20, d: 22

Easytop Slanted seat valve (free-flow valve), with SC-Contur- press connectorsComponentsValve casing and top made of gunmetal or silicium bronze in accordance with DIN 50930-6 / DIN EN 1982, valve seat and valve plate unit stainless steel, spindle transmission, position indication open/closed, ergonomic handwheel and closed with medium marking green/red exchangeable, drain plug G14, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 90 °Cwith DVGW-test markDN: 40, d: 42

Viega 2316.1

Viega 2318

Viega 1118

Viega 1112

Viega 1115.1