Komponenty do szaf sterowniczych i obudów - strona 62

This MicroLogic 2.3 is a 3 poles 3d electronic trip unit used on ComPacT NSX 400/630 circuit breakers. This 400A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.3 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

It is an extended rotary handle for ComPacT NSX 100/160/250, PowerPact Multistandard H/J frames and EasyPact CVS 100/160/250 devices. It is suitable for isolation and it is used for standard applications. It maintains the access to trip unit settings and to the push to trip button. It is equipped with a standard black handle. There is an indication of the three device positions O (OFF), I (ON) and tripped. This extended version makes possible to operate devices installed at back of switchboards, from the switchboard front. The distance between the back of the circuit breaker and the switchboard door is from 185mm to 600mm. The degrees of protection are IP55 and IK08. This rotary handle is padlockable in the OFF position using 1 to 3 padlocks not supplied (shackle diameter 5 to 8mm). As an option, it is possible to install a Ronis or Profalux keylock on the base of the handle to obtain the same function as with a padlock.

Schneider Electric LAD8N20 styki pomocnicze

Schneider Electric RXG22B7 przekaźnik zasilający Czarny

Zelio RXG is a series of plug-in relays for DIN-rail mounting.With a width of only 16 mm. The relays do not take up valuable space in the panel and the 4 different versions make them suitable for any application.The RXG relays can also be used in socket from different suppliers as the placement of the pins on the relays is identical.The unique test button makes it possible to test and operate without any tool and with just one finger.Zelio RXG is available with both 1 changeover contact for 10A and 2 changeover contacts for 5A loads.It is possible to get RXG in a transparent version or a version with either a test button, LED or both combined.The protection modules (diode, diode + LED, RC-circuit or Varistor + LED) are easilly fitted to the socket and are the same for both RXG, RSB or RXM relays. Legends are available for all RXG or RSB socket which makes it possible to identify both socket and relay.RGZS08 is a busjumper for connecting up to 8 sockets on a DIN-rail in a panel.The pins a slightly bended which makes it easy to mount 2 jumpers in parallel and still have room for the wiring.RGZS08 fits both the RGZE1S35M and RGZE1S48M socket.

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

Schneider Electric R9P19616 wyłącznik instalacyjny 1P + N

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

Fuse for protection against short circuits and protection of wires and cables so that they do not use so much current that it can ignite the connected material.

Schneider Electric GV2ME20 wyłącznik instalacyjny

Schneider Electric LC1D

Siemens 5SY6202-7 bez kategorii

Schneider Electric A9F04101 wyłącznik instalacyjny Miniaturowy wyłącznik 1

Siemens 3RV2011-1EA15 bez kategorii

Siemens 5SY4206-7 bez kategorii

Siemens 3NA3832 bezpiecznik Wysokie napięcie 1 szt.

Montagegreb NH P215592

Schneider Electric LADN22S styki pomocnicze

TeSys K kontaktor - 3P(3 NO) - AC-3 - <= 440 V 6 A - cewka 230 V AC

Schneider Electric iC60 RCBO wyłącznik instalacyjny 4P

For wall and DIN rail mounting.

Voltage:

Primary: 230V
Secondary: 8V 2A

Schneider Electric LC1DT20BD styki pomocnicze

The Siemens 5SY6125-7 circuit breaker offers reliable protection against overcurrent and short circuits. It is 1-pole, has a rated current of 25A and a breaking capacity of 6kA according to EN 60898. With C characteristics and a rated voltage of 230/400V AC, it is suitable for both single-phase and three-phase installations. The circuit breaker has an IP20 degree of protection and is designed for easy installation on a DIN rail, ensuring both safety and efficiency in electrical systems.

The Siemens 5SY6120-7 circuit breaker offers reliable protection against overcurrent and short circuits. It is 1-pole, has a rated current of 20A and a breaking capacity of 6kA according to EN 60898. With C characteristics and a rated voltage of 230/400V AC, it is suitable for both single-phase and three-phase installations. The circuit breaker has an IP20 degree of protection and is designed for easy installation on a DIN rail, ensuring both safety and efficiency in electrical systems.

The Siemens 3-pole circuit breaker 5SY6340-7 offers reliable protection with a breaking capacity of 6kA according to EN 60898. With C characteristics and a rated current of 40A, it is ideal for industrial applications. It is easy to mount on a DIN rail and has an IP20 protection class. The fuse supports both single-phase and three-phase installations and is designed to handle current loads up to 400V AC.