Viega - strona 16

T-piece - copper - solder connection d1: 18, d2: 15, d3: 15(quality seal for d12-54)

Sanpress Inox T-kawałek z SC-Contur - stal nierdzewna - łączniki prasowe Elementy uszczelniające EPDM d1: 18, d2: 15, d3: 18

Adapter Raxofix z konturem SC- połączenie prasowe ze stopu brązu krzemowego, gwint R: 20, R: 34

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Viega 3240

Long nipple- gunmetal- R-thread

Raxofix Złącze śrubowe z SC-Contur - brąz krzemowy - połączenie na wcisk, gwint G - uszczelnienie płaskie. Składniki: element uszczelniający EPDM, d: 20, G: 34

Adapter łokciowy Raxofix 90° z konturem SC- połączenie prasowe ze stopu brązu krzemowego, gwint R: 16, R: 34

Viega 3121

Profipress T-kawałek z SC-Contur - miedzianymi złączkami do tłoczenia Elementy uszczelniające EPDM d1: 12, d2: 12, d3: 12

Viega 3090

Viega 3090

Cap- gunmetal- Rp-threadComponentsPolygonRp: 1

Kaptur - miedź - połączenie lutowane d: 12

Viega 94243G

Viega 2225.5

Viega 3241

Łokieć 90° - mosiądz - gwint R, gwint Rp

Nipple- gunmetal- G-threadG: 12

Viega 2311

Viega 94243G

Viega 2211

Viega 2218

Viega 2218

Easytop circulation valve S/E thermostatic control valve for string or floor systems. Silicon bronze. G thread. Can be blocked off. Cylindrical G-thread according to ISO 228 for flat-sealing fittings, valve body made of silicon bronze according to DIN 50930-6 / DIN EN 1982, stainless steel ball, drain plug.