Viega - strona 17

Press connector system with press connectors and pipes made of copper in acc. with EN 1057 and DVGW worksheet GW 392 suitable for:•Gases in acc. with DVGW G 260 in gas installations in acc. with DVGW-TRGI 2008 (DVGW worksheet G 600) / DVFG-TRF 2012•Liquid gas in the gas phase for domestic and commercial applications, tested in acc. with DVGW worksheet G 5614•Heating oil pipelines for heating oil in acc. with DIN 51603-1•Diesel fuel pipelines for diesel fuel, as suction and pressure pipelines in acc. with EN 590 in consideration of the general technical approval Z-38.4-71Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet G 5614, point 4.4.1, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingYellow dot, yellow rectangle and inscription »Gas MOP 5 / GT1«Sealing elementsHNBR, yellowDimensions/MaterialStandard sizes: d 12, 15, 18, 22, 28, 35, 42, 54 made of copperXL sizes: d 64.0 made of copperPress connectors with threaded connection d 12–54 made of gunmetalXL press connectors with threaded connection d 64.0 made of copperAreas of applicationNatural gas/Liquid gasHeating oil/Diesel fuel (d 12–54)NoteOnly Viega copper and gunmetal press connectors, which are marked with a yellow rectangle and have the inscription »Gas MOP 5 / GT1« are permitted for use in installations for gas, heating oil and diesel fuel systems!Use of the system for application areas and media other than those described here must be agreed with Viega Service Center through a material request.Operating conditionsGas and liquid gas systems•Operating temperature -20 °C up to +70 °C•Operating pressure max. 0.5 MPa•Operatin

Kulowe zawory Easytop z połączeniem SC-Contur- press, gwint Rp. Składniki: obudowa zaworu z brązu lub brązu krzemowego zgodnie z DIN 50930-6 / DIN EN 1982, wałek wyboru bezobsługowy, kula ze stali nierdzewnej, dźwignia T-formy do sterowania z oznaczeniem środka w kolorze czerwono-zielonym wymiennym, uszczelka EPDM. Dane techniczne: maksymalne ciśnienie robocze 1,6 MPa (PN 16), maksymalna temperatura robocza 110 °C przy znaku DVGW-test mark DN:15,d:18,Rp:12

Łatwa kula zaworowa - Wejście/wyjście: gwint Rp. Składniki Obudowa zaworu z mosiądzu lub brązu krzemowego zgodnie z DIN 50930-6 / DIN EN 1982, wałek wyboru bezobsługowy, stalowa kula, dźwignia T-formy do sterowania z oznaczeniem środka w kolorze zielonym/czerwonym wymienna. Dane techniczne ciśnienie robocze maksymalne 1,6 MPa (PN 16), temperatura robocza maksymalna 110 °C ze znakiem testowym DVGW DN:32 Rp:114'

Viega 2316

Easytop Ball valve with SC-Contur- for water- and heat meter- not suitable for Easytop Insulating shell 2275.90- press connection, G-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, black powder-coated actuating lever made of metal, EPDM sealing element, EPDM flat seal.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test mark DN: 20, d: 22, G: 34

Viega 2326.1

Viega 2326.1

Viega 1117.2

Viega 2211

Viega 2211

Viega 2217.2

Sanpress Adapter z pistoletem SC-Contur - gunmetal lub brąz krzemowy - połączenie prasowe, gwint Rp. Elementy składowe uszczelnienie EPDM, wielokąt, certyfikacja VdS d: 42, Rp: 112

Sanpress Sliding coupling with SC-Contur- gunmetal or silicium bronze- press connectors ComponentsEPDM sealing elements, VdS certificationd: 42

Easytop Slanted seat valve (free-flow valve), with SC-Contur- press connectorsComponentsValve casing and top made of gunmetal or silicium bronze in accordance with DIN 50930-6 / DIN EN 1982, valve seat and valve plate unit stainless steel, spindle transmission, position indication open/closed, ergonomic handwheel and closed with medium marking green/red exchangeable, drain plug G14, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 90 °Cwith DVGW-test markDN: 32, d: 35

Viega 2212.1

Viega 2311

Viega 95243

Viega 94471G

Sanpress Inox Reduktor z SC-Contur - stal nierdzewna, końcówka wtykowa z połączeniem na wcisk. Składniki: element uszczelniający EPDM, certyfikat VdS. d1: 54, d2: 28

Sanpress Inox Złącze z SC-Contur - stal nierdzewna - łączniki do montażu. Elementy uszczelniające EPDM o średnicy 54 (certyfikat VdS)

Viega 95243

Viega 94270G

Viega 2416.1

Viega 2416.1

Viega 2616.1