Thermal Grizzly Chłodzenie CPU

The Intel High Performance Heatspreader V1 is an upgrade heatspreader for Intel processors. The nickel-plated copper heatspreader has a 207 percent larger, diamond-milled precision surface. This increased surface area compared to the original heatspreader enables maximum heat dissipation for air and water coolers, while the precision milling ensures extremely low surface roughness for the best contact with the heat sink.

The Intel High Performance Heatspreader V1 is compatible with the following processors:

Intel 12th Gen CPUs
Intel 13th Gen CPUs
Intel 14th Gen CPUs (200s)

Scope of delivery

1x Intel High Performance Heatspreader V1
4x pan-head screws UNC thread 3/8"
1x hexagon socket wrench 5/64"
1x angle wrench Torx T20
 

Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.

TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.

• Electrically non-conductive alternative to conventional thermal pads


• Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components


• Apply broadly with spatulas or shape into small pellets for precise placement


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Operating temperature range −40°C to +120°C


• Advance variant includes three spatulas for application

Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.

The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.

• Electrically non-conductive alternative to conventional thermal pads


• Compensates gaps from 0.2–3.0 mm


• Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity


• Includes three spatulas for application


• Operating temperature range −40°C to +120°C


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)

Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.

Thermal putty is an electrically non-conductive, flexible gap filler that replaces conventional thermal pads on GPUs and bridges height differences from 0.2 to 3.0 mm.

Formulated for GPU modifications, TG Putty is easy to shape for precise contact with VRAM and SMD components and can be applied broadly with a spatula or formed by hand.

• Electrically non-conductive alternative to thermal pads


• Fills gaps from 0.2 to 3.0 mm for consistent contact


• Apply with spatulas or by hand (gloves recommended)


• Available in variants with different thermal conductivities


• Operating range −40°C to +120°C


• Not suitable for use on processors (IHS or direct die) or directly on the GPU die

Easy to shape and tailor-made for memory and voltage-regulator contacts, it simplifies GPU pad replacement and cooler modifications.

The PhaseSheet PTM is a thermal pad based on a phase change material (PCM). The pads, which are solid at room temperature, can be easily applied and liquefy during operation, allowing them to effectively dissipate heat like a thermal paste. PhaseSheet PTM is electrically non-conductive and can therefore be used in many areas, with the primary application being in processors and graphics chips.

Thermal pad, red brown

Pasta termoprzewodząca, zaprojektowana do Overclockingu, przewodność cieplna 14,2 W/m*K, bez utwardzania, 33.84 gramy

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

The AM5 High Performance Heatspreader is an upgrade for AMD's Ryzen 7000 CPUs. The heatspreader's precision diamond-milled nickel-plated copper surface provides 240% more surface area. As a result, the AM5 heatspreader allows for maximum heat dissipation with air and water coolers.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

Processor heatsink paste, srebrny

CPU contact sealing frame, czerwony/czarny, czarny

Pasta do chłodzenia metali w płynie, pasta srebrna, gęstość: 6,29 g/cm3, temperatura pracy: -50 - 200° C, 1 gramów

CPU Contact Frame improves cooling by shifting contact pressure to the edges, preventing IHS concavity and enabling better cooler contact on Intel LGA1700 sockets.

The Thermal Grizzly CPU Contact Frame Intel 1700 LT is the injection-molded "Lite" mounting frame made from ABS reinforced with 15% glass fiber that replaces the standard ILM to increase contact surface and simplify installation.

• Injection-molded ABS with 15% glass fiber for added stability


• Inner contour shifts pressure from centre to edges to avoid concave IHS


• Designed for Intel LGA1700; compatible with 12th, 13th and 14th Gen CPUs


• Only for CPUs whose IHS has been ground down by no more than 0.2 mm


• Includes 4 pan-head screws (UNC 3/8"), 5/64" hex socket wrench and Torx T20 angle wrench

Simple installation and improved cooler contact can lead to noticeably lower CPU temperatures depending on the cooler and processor.

Pasta termoprzewodząca

Grease spatula (pakiet 3)

Water cooler for direct‑die mounting on AMD AM5 CPUs featuring a nickel‑plated copper cold plate, a hybrid microfin structure with a jet plate for optimized flow and integrated ARGB lighting.

The AMD Mycro Direct-Die Pro is engineered for delidded AM5 processors, replacing the SAM and heatspreader to sit directly on the silicon while the nickel plating limits gallium-based liquid metal diffusion and the hybrid fin design reduces flow resistance.

• Direct‑die mounting for delidded CPUs (requires removal of Socket Actuation Mechanism)


• Nickel‑plated copper cold plate with two sizes of microfins and jet plate


• Annealed acrylic under an anodized aluminum cover to prevent stress cracks


• Digital ARGB LEDs under the cover, controlled via 3‑pin ARGB header (+5V/DATA/GND); LEDs illuminate the acrylic and G1/4 connectors


• G1/4‑inch connections for coolant lines


• Compatibility: generally compatible with Ryzen 9000 series including X3D variants; not compatible with Ryzen 5 7400F or Ryzen 8000G APUs (As of September 2025)


• Includes insulation sheet, 600 mbar pressure test report, mounting screws and wrenches

Provides direct‑die cooling with optimized flow and integrated lighting while the nickel plating reduces the need for repeated liquid‑metal applications.

Pasta termoprzewodząca, jasnoszara

Nakładacz pasty termoprzewodzącej z płynnym metalem (opakowanie 3 sztuk)

High-end thermal paste. Kryonaut thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community. Kryonaut is also highly recommended as a top product for critical cooling systems in the industrial environment.

• Designed for Overclocking
• Excellent thermal conductivity
• No curing
• Long-term durability
• No electrical conductivity!

Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus achieving remarkable heat transfer.
 

Water cooler optimized for Intel LGA1851 direct-die mounting with a nickel-plated copper microfin cold plate, low-flow-resistance jet channels and integrated RGB lighting.

The Intel 1851 Mycro Direct-Die Pro RGB V1 is designed to sit directly on a delidded Intel CPU to send heat straight into the water loop, with an acrylic-and-aluminum cover and controllable ARGB illumination.

• Direct-die installation for LGA1851 CPUs — requires removal of the ILM and CPU heatspreader; delidding is at your own risk


• Nickel-plated copper cold plate with microfins and a jet system, engineered for low flow resistance


• Acrylic layer tempered after milling to prevent stress cracks beneath the anodized aluminum lid


• Digital aRGB LEDs under the lid, controllable via a 3-pin ARGB header (+5V/DATA/GND); LEDs also illuminate the G1/4 fittings


• G1/4-inch female threading for standard fittings


• Tested with KryoSheet and thermal pads — additional pad thickness affected contact pressure and showed no significant temperature improvements

Built for users who want a compact direct cooling path from the CPU die into a water loop while retaining customizable RGB lighting.

Thermal pad, red brown

Podkładka termiczna Thermal Grizzly Minus Pad extreme 2 zapewnia znakomitą przewodność cieplną i niską rezystancję termiczną interfejsu dla zastosowań o wysokiej wydajności.

Thermal Grizzly Minus Pad extreme 2 został zaprojektowany tak, aby wypełniać nawet najmniejsze szczeliny cząstkami przewodzącymi ciepło dzięki kompozycji z tlenku glinu, wodorotlenku glinu i proszku aluminiowego, wspierając optymalny transfer ciepła między źródłem ciepła a chłodzeniem.

• Wysokowydajna podkładka termiczna do ekstremalnych zastosowań
• Zoptymalizowany skład materiału dla niskiej rezystancji termicznej interfejsu
• Miękka konsystencja dobrze dopasowuje się do powierzchni styku
• Elektrycznie nieprzewodząca
• Nie utwardza się ani nie twardnieje z upływem czasu, nawet przy długotrwałym użytkowaniu

Niezawodny materiał interfejsu dla stabilnego, wydajnego transferu ciepła w wymagających konfiguracjach.

Delid-Die-Mate Intel 13th Gen to narzędzie do usuwania rozpraszacza ciepła ("delidding") na procesorach Intel dla gniazda LGA1700. Usuwając rozpraszacz ciepła, procesory mogą być chłodzone za pomocą "bezpośredniego układu", na przykład. W tak zwanej technologii "bezpośredniego układu" chłodzenie CPU jest zamocowane bezpośrednio na chipie procesora. Poprzez pominięcie rozpraszacza ciepła w obwodzie chłodzenia możliwe jest znacznie zoptymalizowanie przesyłu ciepła z matrycy do chłodnicy CPU.